Experimental Phototube, maker unknown
Tube photo-électrique expérimental, fabricant inconnu
Experimentelle Fotoröhre, Hersteller unbekannt
This tube was sold by FAIR RADIO SALES Co., Inc. (Lima, Ohio). Some similar tubes from the same source have a slighly different design (xp001, xp003, xp037).
The end window has some semi-transparent coating; two radial pins connect to a heavily metallized deposited ring at the face.
The lateral tubulation port could have been used for the introduction of small evaporation sources to form the photosensitive layer.
A filament, partially coated, is inserted into a metal cylinder. Its resistance measures about 4 Ω.
Another collector has a similar tube with a paper sticker on it giving some sensitivity specs: “120 mA/L, 10/23/68”.
Three of the "long electrodes" have electrical connections at each end and are made of a folded thin sheet spotwelded into a tube-like structure. They would appear to carry a payload of material which could be resistively heated.
These tubes have defied the perspicacity of many vacuum tube specialists and collectors.
Hauteur • Height • Höhe : 129 mm • 5" 1/8
Diamètre • Diameter • Durchmesser : 56 mm • 2" 1/4
Le contenu de ce site est sous copyleft The content of this site is under copyleft Der Inhalt dieser Website steht unter Copyleft