home en fr de <-- ^ -->

TAKK Corporation TAKK-TRON High Voltage Cold-Cathode Rectifier Type 60-8
Tube redresseur à haute tension
Hochspannungsgleichrichter

TAKK Corp was an industrial research laboratory doing ca. 1950-1960 lots of stuff with electrostatic charges.

This high-voltage rectifier does not use heated cathodes. It is a gas-filled diode in which the cathode is composed of an array of fine wire points. The cathode, when negative, discharges to the anode which consists of a fired-on graphite coating on the interior of the Pyrex-glass envelope.

The Takktron type 60.8 rectifier tube had a maximum inverse peak-voltage rating of 21 kV. It was designed for a maximum output current of two milliamperes and at this current it provided a direct voltage of five kilovolts. At "noload", the tube delivered nine kilovolts direct current.

F.W. Atkinson and Robert B. Taylor, A Portable Instrument for Measuring Insulation Resistance at High Voltage, April 1945.

See also • Voir aussi • Siehe auch :
• TRANSITRON TYPE V101-2 High Voltage Rectifier.
• TAKK Model 41 High Voltage D-C Insulation Tester.

 

TAKK-TRON High Voltage Cold-Cathode Rectifier Type 60-8

Hauteur • Height • Höhe : 158 mm • 6" 2/10
Diamètre • Diameter • Durchmesser : 80 mm • 3" 1/10

TAKK-TRON High Voltage Cold-Cathode Rectifier Type 60-8

TAKK-TRON High Voltage Cold-Cathode Rectifier Type 60-8

 


Le contenu de ce site est sous copyleft - The content of this site is under copyleft - Der Inhalt dieser Website steht unter Copyleft